Request a quote
Request a quote
Adjustable feet on the grid, platforms resting on the pins, levelling from above and floor tiles on top. A level floor in any exhibition hall, with room for cables underneath.
Four platforms on adjustable feet, in the order they are assembled. Choose the size, set the foot height between 50 and 100 mm and press “Simulate platform assembly”. The “Foot” view shows the part on its own, with its full travel.
Fir frame, high-load honeycomb core, 4 mm MDF skins. Delivered squared, drilled for the foot pins and with notches for adjustment. Sizes 998 × 998, 998 × 498 and 498 × 498 mm, or made to measure.
Base, threaded rod and top plate with four pins that go into the platform holes. Adjustment from 50 to 100 mm.
Floor tiles 11 or 18 mm thick in the same sizes as the platforms, and perimeter edge covers in the same finish.
Start from the floor plan: the foot grid follows the platform sizes (1000 × 1000, 1000 × 500, 500 × 500 mm).
A PR-001 adjustable foot goes on every corner, shared by the platforms that meet there. This is the basic layout.
Where more load capacity is needed or the floor is uneven, further feet go at mid-sides and in the centre of the large platform: the holes are already there.
The threaded rod raises the foot plate from 50 to 100 mm. With the 40 mm platform the finished level is between 90 and 140 mm from the floor.
The platforms rest on the feet: the plate pins go into the pre-drilled holes and hold them in place.
The notches on corners and sides give access to the top of the rod: fine levelling is done with the key from above, without lifting the platforms.
Floor tiles go on top of the platforms; the perimeter is closed with edge covers in the same finish.
| Foot | Platform level | With 11 mm tile | With 18 mm tile |
|---|---|---|---|
| Minimum · 50 mm | 90 mm | 101 mm | 108 mm |
| Middle · 75 mm | 115 mm | 126 mm | 133 mm |
| Maximum · 100 mm | 140 mm | 151 mm | 158 mm |
The 50 mm travel of the foot absorbs the slopes and joints of the hall floor; the void under the platforms stays free for cables and services.
In the basic layout the feet sit at the corners and are shared between neighbouring platforms: on a regular grid that is just over one foot per platform. Where many people walk, under heavy furniture or on very uneven floors, add feet at mid-sides and in the centre. Send us the floor plan and we will count them with the quote.
From 50 to 100 mm. With the 40 mm platform the finished level is 90 to 140 mm from the floor, plus the thickness of the floor tile.
From above, through the notches at the corners and sides of the platform: reach the top of the rod with the key and level without lifting anything.
998 × 998, 998 × 498 and 498 × 498 mm, 40 mm thick. Other sizes are made to measure from a drawing, even single pieces.
No. Platforms have a high-load honeycomb core and a central rail; a wall panel is not designed to be walked on.
Sizes, quantities and finish: with those three things we normally send a written quote within 24 working hours. We work in English, French, German and Italian.