Request a quote
Request a quote
The system that holds the stand together: alignment strips, I, L, T and X connectors, edge trims and cover strips. Dry assembly, no glue and no tools.
A honeycomb panel on its own is half a product. What makes a stand assemblable in a few hours is the connector system: the grooves machined around the panel and the accessories that couple them. Without that you are back to brackets, screws and foam — a slow build and a destructive dismantle.
Our connectors are made from wear-resistant materials, treated against oxidation and scratching, to a tolerance that gives a play-free fit with our panels — and keeps it after many build and dismantle cycles. That is the difference between a system you reuse and one that wobbles the third time out.
2200 × 28 × 4 mm in HDF. It slots into the vertical groove between two adjacent panels and stops them stepping out of line at the joint: it is what turns a continuous wall into a genuinely continuous wall. Free with the panels.
400 × 15 × 15 mm. Joins two panels in a straight line for continuous surfaces. The most-used junction of all.
185 × 185 × 2 mm. A 90-degree join: corners, edges and perimeter walls.
355 × 185 × 2 mm. Joins three panels: branches, partitions and internal structures.
355 × 355 × 2 mm. Joins four panels in a cross: central junctions and symmetrical layouts.
2500 or 3000 × 40 × 3 mm. Closes the exposed panel edges and protects them from knocks and wear.
| Code | Component | Size (mm) | Function | Price |
|---|---|---|---|---|
| AA-001 | Alignment strip | 2200 × 28 × 4 | HDF. Vertical alignment between adjacent panels. | Free |
| EG-I01 | “I” connector | 400 × 15 × 15 | Joins two panels in a straight line. | €2.80 |
| EG-L01 | “L” connector | 185 × 185 × 2 | 90-degree join: corners and perimeter walls. | €7.80 |
| EG-T01 | “T” connector | 355 × 185 × 2 | Joins three panels: branches and partitions. | €9.80 |
| EG-X01 | “X” connector | 355 × 355 × 2 | Joins four panels in a cross. | €12.80 |
| CF-001 | Cover strip | 2500 × 40 × 3 | Closes and protects exposed edges. | €0.80 |
| CF-002 | Cover strip | 3000 × 40 × 3 | Version for 3,000 mm panels. | €0.80 |
Also available: white and black edge trims that protect the panel edges from knocks and visually close the cut. Quick and simple to fit, and available made to measure.
You count them off the plan, not off the panel schedule. The rule of thumb:
Send us the stand plan: we will work it all out with the quote, so you do not arrive at the show with the panels and without the junctions.
Standard sizes are always in stock. We normally ship within 7 days of order confirmation and in practice almost always sooner: in exhibition work the enquiry arrives from one day to the next, and we are set up for that.
For deliveries outside Italy we agree the build-up slot, the customs paperwork where it applies and the transport documents with you in advance.
Yes, it is included with the panels. It stops adjacent panels stepping out of line, and there is no sense in charging for it separately.
They are matched to the grooves on our panels, where they fit with no play. On panels from another source the fit is not guaranteed.
They are made from wear-resistant materials treated against oxidation and scratching, so the fit survives many build and dismantle cycles.
Yes, in white and black: they protect the panel edges from knocks and visually close the cut. Available made to measure too.
Sizes, quantities and finish: with those three things we normally send a written quote within 24 working hours. We work in English, French, German and Italian.